Manual

15
Should You Decide NOT To Fire
The G2 Contender
®
After The Hammer
Has Been Cocked, Then You Must Take
The Following Steps:
If, after cocking the G2 Contender, the shooter decides not to fire, the following pro-
cedure must be followed:
1. Set the manual firing pin selector to the neutral position.
2. Keeping the G2 Contender pointed in a safe direction, lower the gun.
3. Firmly hold your thumb on the hammer so that it cannot drop freely.
Pull the trigger rearward only long enough to disengage the hammer.
Remove your finger from the trigger.
4. Carefully lower the hammer forward, allowing the automatic hammer
block to engage in the “at rest” position as shown on the next page.
The manual firing pin selector has been set to the neutral position and thumb is
held firmly on the hammer so it will not drop freely when trigger is pulled.
The hammer is held away from the firing pin by the automatic hammer block
Pistol