Manual

34
Using Cleaning Implements With Your
G2 Contender Muzzleloader
Thompson/Center muzzleloading firearms are supplied with a cleaning jag which is
the proper size for the particular caliber. For cleaning use commercial cleaning patches
(round or square) or pieces of discarded clothing.
When using the cleaning jag,keep in mind that patch size and thickness are impor-
tant. Start with a patch that is approximately 2 1/2" square (or in diameter). Position it over
the jag as pictured in the illustration and try it in the bore of the firearm (wet patches will
enter more easily than dry ones). If it seems to be too tight - don’t force it. If your trial
patch proves to be too tight, use a smaller size patch and/or thinner material.
A patch which is too small or thin will pull free from the jag teeth during the clean-
ing process. Such “lost patches” can be quickly retrieved by use of the worm (see illus-
tration). Cleaning will go easier, however, if you establish and maintain an optimum
patch/jag/bore fit.
Thompson/Center does not package the worm with each firearm. This is an optional
tool and must be purchased separately (one size fits all calibers - see current catalog). The
worm is an extremely important muzzleloading tool and every shooter should carry one in
his implement bag. While its prime purpose is to retrieve “lost patches”, it can also be used
for field cleaning. To do so you simply catch the cleaning patch on the tines of the worm
and push it into the bore in the conventional manner.
Iron Sight Adjustment
For The G2 Contender
™
Muzzleloader
G2 Contender muzzleloaders are equipped with a standard rifle rear sight (Diagram
“B”
Below) which is adjustable for elevation by moving the elevation “blade” up or down
to change the point of impact. To do this, turn the Elevation adjustment Screw clockwise
The Rotating 
tines of the Worm 
w
ill snag and 
retrieve patches 
l
ost in the bore. 
A Patch on the 
Worm may also be 
u
sed for field 
cleaning.
Patch in Bore
Bore
Cleaning Jag
Patch Worm
The Cleaning Jag
threads onto the 
end of the 
r
amrod.
The Patch Worm
threads onto the 
tapered end of 
t
he ramrod.
Position Patch 
over the end 
o
f the Jag.
Patch thickness 
r
equires 
judgement 
(see text).