Manual

16
Assembly and Loading of
T/C Mag Express
™
Sabots
T/C Mag Express Sabots come in several variations for .50 caliber muzzleloading applications;
some accept 44 caliber (.429” - .430” diameter) bullets and others accept 45 caliber (.451” -
.452” diameter) bullets. In either case, insert the correct diameter projectile into the sabot and
press firmly, making sure the bullet is fully seated.
When loading T/C’s Mag Express Sabots, make sure that your gun is unprimed, and that your
Mag Express Sabot has been properly assembled. Failure to assemble and load your sabot
correctly could result in the bullet disengaging from the sabot. This could result in an air
space between the components. UNDER SUCH A CONDITION, ONE OR MORE OF THE COM-
PONENTS MAY ACT AS A BARREL OBSTRUCTION AND FIRING COULD RESULT IN INJURY
AND/OR DEATH TO THE SHOOTER OR BYSTANDERS AND DAMAGE TO PROPERTY.
To properly assemble your T/C Mag Express Sabot, insert the projectile into the sabot and
press firmly, making sure the bullet is fully seated. Use only bullets of the correct diameter.
Use only bullets of the correct diameter that were designed for the sabots you are using.
Using bullets of lesser diameter may cause the bullet to separate from the sabot resulting
in a barrel obstruction. Using bullets of larger diameter could result in difficult loading, or
a condition wher
e the sabot is not seated all the way down on the powder char
ge, r
esulting
in a barrel obstr
uction.
EITHER CASE CAN RESUL
T IN A DAMAGED FIREARM AND POSSIBLE
INJURY AND/OR DEATH TO THE SHOOTER OR BYSTANDERS AND DAMAGE TO PROPERTY.
Assembled Sabot
Mag Express
Sabot
Bullet
of the
Correct
Diameter
Seat Fully