Manual

62
Pro-Hunter Speed Breech Cont’d
IMPORTANT: When re-
installing the breech plug after
cleaning your muzzleloader,
you should lubricate the entire
surface area of the threads on
the breech plug with a good
anti-seize lubricant (like
Thompson/Center’s Super
Lube) as well as the threads
inside the breech area of the
barrel itself. Failure to lubricate
the threads in both places may
lead to difficulty in removing the
breech plug after firing the gun
(FIG.11).
WARNING: ALWAYS HAVE ADEQUATE VENTILATION.
CLEANING FIREARMS IN POORLY VENTILATED
AREAS, DISCHARGING FIREARMS, OR HANDLING
AMMUNITION AND LOADING COMPONENTS MAY RESULT
IN EXPOSURE TO LEAD AND OTHER SUBSTANCES KNOWN
TO CAUSE BIRTH DEFECTS, REPRODUCTIVE HARM AND
OTHER SERIOUS PHYSICAL INJURY. WASH HANDS THOR-
OUGHLY AFTER EXPOSURE.
Heat-Resistant
Replaceable O-Ring
T
/C Part
#7531
PATENT PENDING
Alignment Pin
FIG.10
Gas Rings
FIG.11
T/C Part #7362