Specification Sheet

269
thomaslighting.com • 888-202-9605
RECESSED
symbol denotes wet location tolerable
Lamp wattages noted on this page are typical for most applications. Some housing and
trim combinations may vary. Consult label inside individual housing for specific wattage.
6” IC SHOWER TRIMS
TSH16IC
White Drop Opal Shower Trim
Metal trim ring, with reflector, for
IC applications.
Outside Diameter 8”
IC non-IC
Lamp Max. Watt Max. Watt
A19 40 N/A
TSH12IC
White Albalite Shower Trim
Metal trim ring, with
reflector, for IC applications.
Outside Diameter 8”
IC non-IC
Lamp Max. Watt Max. Watt
A19 25 N/A
6” NON-IC SHOWER TRIMS
Non-IC shower trims do not include a reflector. The housing must have a
socket plate. Not suitable for use with NSP housings.
socket plate. Not suitable for use with NSP housings.
TSH16
White Drop Opal Shower Trim
Aluminum trim ring, no reflector,
for non-IC applications.
Outside Diameter 8”
IC non-IC
Lamp Max. Watt Max. Watt
A19 N/A 60
PS9 Compatible
TSH12
White Albalite Shower Trim
Aluminum trim ring, no reflector, for
non-IC applications.
Outside Diameter 8”
IC non-IC
Lamp Max. Watt Max. Watt
A19 N/A 60
PS9 Compatible
TR6SHR
White Open Shower Trim
For IC or non-IC applications.
Outside Diameter 8”
IC non-IC
Lamp Max. Watt Max. Watt
PAR38 90 90
All shower trims are rated for wet locations. IC shower trims include a reflector which also supports the
socket. Use with NSP housings or remove the socket plate from standard housings.
6” DIRECTIONAL TRIM
6” DIRECTIONAL TRIM
TR18W
White Eyeball
Outside Diameter 8”
IC non-IC
Lamp Max. Watt Max. Watt
R30 75 75
PS9 Compatible
TR18BN
Brushed Nickel Eyeball
Outside Diameter 8”
IC non-IC
Lamp Max. Watt Max. Watt
R30 75 75
PS9 Compatible
TR18BN