Technical Bulletin

Cable Fastening Systems
Cable Fastening Systems
Installers Know and Trust Ty-Rap High-
Performance Fastening Products from
Thomas & Betts
Wire and cable bundling is an integral part of modern electrical and
electronic installations. To finish your harnessing and bundling project
as reliably, professionally looking and economically as possible, choose
genuine Ty-Rap cable ties. These fastening systems include a full range of
cable ties, identification ties, clamps, bases, harnessing aids and installing
tools. Using Ty-Rap fastening systems for all fastening jobs, large and small,
will speed and improve the reliability of harnessing and wire bundling while
saving you money.
Trust Ty-Rap
®
to securely
fasten your cables!
Harnessing
T&B fastening systems for large volume cable tying combine high-speed
ergonomically designed tools, along with a wide selection of ties and
harnessing aids to meet your application requirements. Accessories include
various mounting bases, harnessing aids, retainers, clips, clamps, supports,
posts, pins and guides that allow the wire to be quickly routed with or without
the use of harness nails.
Point-to-Point and Long Distance Wiring
• Bundling & fastening cables between equipment
• Panel & Machine Tool Builders
• Industrial & Commercial Applications, Refineries,
Office Buildings
Installers prefer the ease of use and exceptional durability of genuine
Ty-Rap cable ties. Engineered for labor savings and high performance,
Ty-Rap cable ties are commonly used in a variety of applications. Standoffs,
bulkhead mounting bases, adhesive mounting bases and a wide variety of
clamping devices will meet or exceed any requirements. Weatherable and
special material Ty-Rap cable ties are exceptionally suited for years of
service in extreme environments.
Cable Fastening Accessories
Choose from one of the largest assortments of mounting bases, clips and
clamps, spacers, lashing straps, harness board accessories, braided wire
protection sleeving, and accessories for your fastening needs. Use Thomas
& Betts cable fastening accessories for the finishing touch on your next
wiring project.
Tools
Ty-Rap installing tools properly complete the installation of the cable tie. Ties are
cinched to the proper tension and the excess tail is cut off precisely flush with
the head, leaving no sharp corners or ragged edges. Ty-Rap installing tools are
lightweight with narrow noses and slim profiles for work in tight spaces or
between harness board nails. The operation is quick, reliable and cost effective.
Other Applications
• HVAC
• Recreational
• Telecom & Utility
• Packaging
Ty-Rap cable ties are remarkably well suited for a variety of other non-
electrical applications. Ty-Rap cable ties exceed UL 1565 requirements for
smoke developed and heat release for use in air handling spaces. Ty-Rap
cable ties meet international standards such as CSA and CE as well as UL,
, Belcor, ADC and military specifications in North America. T&B also
offers a complete stainless steel and Deltec
®
cable fastening system for
demanding and weather-resistant applications. Choose genuine Ty-Rap
cable ties for the rugged “Grip of Steel.” Look for the oval head.
®
• Harness Board
pre-wiring prior
to installation
• Large OEMs —
Automotive, Aerospace,
Computers, Electronics,
Copiers, Appliances and
other Durable Goods
Overview
D-2
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Canada
Tel: [phone]
Fax: [phone]
Technical Services
Tel: [phone]
www.tnb.com
tnb06_wrtrm_secd_p02_03 8/9/07 12:40 PM Page D-2