Cut Sheet

Catamount
¨
Cable Tie Accessories
Above Board Electronics • Phone: [phone] Fax: [phone] • www.AboveBoardElectronics.com
• 3/4" and 1" Mounts for Use with 18# through
50# Tensile Cable Ties
• Supplied “Two-Up” on Rubber Based (Synthetic
Polymer) Closed Cell Foam Adhesive, “Single-Cut”
for Acrylic Based Adhesive or with no Adhesive for
#6 Screw Mount applications
• Available in 6/6 Natural Nylon and Heat Stabilized
Black Nylon
• UL Flammability 94 V-2 (clip)
L
Mounting
Hole
S
H
W
HLWSS
Per Mount Height Length Width Slot Height Slot Width
Item Number Package Material Method Inch (mm) Inch (mm) Inch (mm) Inch (mm) Inch (mm)
MPNY-750-0-C 100
Black Nylon
MPNY-750-0-D 500
MPNY-750-9-C 100
Natural Nylon
MPNY-750-9-D 500
MPNY-750A-0-C 100
Black Nylon
MPNY-750A-0-D 500
.205 (5.21) .750 (19.04) .750 (19.04) .050 (1.27) .140 (3.18)
MPNY-750A-9-C 100
Natural Nylon
MPNY-750A-9-D 500
MPNY-750S-0-C 100
Black Nylon
MPNY-750S-0-D 500
#6 Screw
MPNY-750S-9-C 100
Natural Nylon
MPNY-750S-9-D 500
Tolerance ± .010 (.254) .015 (.381) .010 (.254)
1" x1" Mount
HLWSS
Per Mount Height Length Width Slot Height Slot Width
Item Number Package Material Method Inch (mm) Inch (mm) Inch (mm) Inch (mm) Inch (mm)
MPNY-1000-0-C 100
Black Nylon
MPNY-1000-0-D 500
MPNY-1000-9-C 100
Natural Nylon
MPNY-1000-9-D 500
MPNY-1000A-0-C 100
Black Nylon
MPNY-1000A-0-D 500
.215 (5.46) 1.000(25.40) 1.000(25.40) .070 (1.78) .203 (5.16)
MPNY-1000A-9-C 100
Natural Nylon
MPNY-1000A-9-D 500
MPNY-1000S-0-C 100
Black Nylon
MPNY-1000S-0-D 500
#6 Screw
MPNY-1000S-9-C 100
Natural Nylon
MPNY-1000S-9-D 500
Tolerance ± .010 (.254) .015 (.381) .010 (.254)
Synthetic
Polymer
Synthetic
Polymer
Acrylic
Adhesive
Acrylic
Adhesive
For use with 18-40 lb. Cable Ties
For use with 18-50 lb. Cable Ties
3/4" x3/4" Mount
MOUNTING PADS
¥Mounting Surface should be cleaned with alcohol based (IPA)
cleaner before application.
¥Rubber Based adhesive provides instant adhesion. Acrylic
Based may be repositioned initially. Allow 24-72 hours set-up
for maximum performance with Acrylic Based adhesives.