Cut Sheet

Aluminum Mogul Conduit Outlet Bodies
A-49
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
www.tnb.com
Application
• Raintight junction for bringing electrical service into a location
• Spacious, accessible wiring chamber provides a convenient
location to pull conductors and make splices
Features
• Copper-free* aluminum provides increased corrosion resistance
• Precision cast and machined surfaces permit safer wire pulling
• Clean cover edges provide good gasket sealing
• Precision NPT threaded hubs enable trouble-free field
installation for rigid and IMC conduit
• Deep slotted stainless steel cover screws for faster
installation
• Clear UL, CSA and cubic content markings speed approval
by inspectors
• Dome-style cover permits easy wire pulling
• Meets NEC Article 370-28, 6-1 ratio
• Meets NEMA 3R standards
Standard Materials
• Mogul Pulling Elbows: Die cast aluminum alloy A360
with less than .004 copper content (copper-free).
Stainless steel screws
• Gaskets: Composition
Standard Finish
• Aluminum lacquer finish
Listings/Compliances
• UL Listed
• CSA Certified
• Federal Spec. W-C-586
• NEC Article 370-28
Sample Specifications
• Mogul Pulling Elbows shall be die cast copper-free*
aluminum alloy A360. All conduit stops shall be coined and
free of rough edges. Mogul Pulling Elbows shall be finished
with aluminum lacquer
Mogul Pulling Elbows shall be Red•Dot
®
Catalog No. ______
*Less than .004 copper content
MALB
Copper-free
aluminum
Clean
cover
edges
Strong I-beam
construction
Smooth
conduit
stops
Precision
machined
threads
Deep slotted
stainless steel
screws
Large
dome
cover
Clear
markings
®
®-