Cut Sheet

Conduit Outlet Bodies
Application
Conduit Bodies are installed in conduit systems to:
• Connect conduit sections
• Act as pull outlets when conductors are being installed
• Provide easy access for splices in branch conductors
• Make 90˚ bends in conduit runs
• Act as mounting outlets for wiring devices
and lighting fixtures
• Provide access to conductors for maintenance
and future system changes
Features
• Standard features include tapered (NPT) threads
and integral bushings to protect wire insulation
• T&B Form 7 bodies and covers are interchangeable
with other manufacturer’s Form 7 bodies and covers
• T&B Form 8 bodies and covers are interchangeable
with other manufacturer’s Form 8 bodies and covers
• T&B Form 7 and Form 8 bodies feature BlueKote
internal coating for easier wire pulling
• T&B Series 35 bodies and covers are interchangeable
with other manufacturers’ 35/5 Series iron and steel
bodies and covers
Materials
Form 7, Form 8 and Series 35 Conduit Bodies . . . . . . . . Sand-cast class 30
gray iron alloy
Red•Dot
®
Conduit Bodies . . . . . . . . . . . . . . Die-cast aluminum, copper-free
Covers . . . . . . . . . . . . . . Sand-cast gray iron alloy and stamped sheet steel
with steel-stainless steel screws
Gaskets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Neoprene
Finish
Form 7, Form 8 and Series 35 Conduit BodiesZinc-plating with aluminum
acrylic coating
Form 7 and Form 8 Bodies . . . . . . . . . Internal PTFE-based BlueKote coating
Red•Dot
®
Conduit Bodies . . . . . . . . . . . . . . . . . . . . . . . . . Aluminum laquer
Covers . . . . . . . . . . . . . . . . . . . . . . . . Gray iron zinc-plating with aluminum
acrylic coating, and stamped steel zinc-plating with
clear chromate coating; Form 7 and Form 8 covers
include neoprene gasket
Listings/Compliances
UL Standard: 514A, 514B
Fed. Spec: W-C-586D
CSA Standard: C22.2 No. 18
Conduit Outlet Bodies
A-36
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
www.tnb.com