Cut Sheet
Table Of Contents
- T&B Fitting
- Product Overview
- Rigid & Intermediate Metal Conduit Fittings
- Form 7, Form 8, Series 35, Conduit Outlet Bodies & Covers
- Mogul Conduit Outlet Bodies
- FS/FD Cast Device Boxes and Covers
- Conduit Outlet Boxes
- Conduit Outlet Elbows, Reducers, Plugs, and Adapters
- Three-Piece Couplings
- Sealing Fittings
- Kopr-Shield Compound
- Jacketed Metal Clad Cable Termination Fittings
- Tray Cable Fittings
- EMT Fittings
- Liquidtight Flexible Metal Conduit Fittings
- Shureflex™ Nylon Conduit System
- XTRA FLEX System
- Flexible Cord and Cable Fittings
- Flexible Cord and Cable Fittings - Non-Metallic
- Service Entrance Cable Fittings
- Metal Clad Cable, Armored Cable and FlexibleMetal Conduit Fittings
- Non-Metallic Sheathed Cable Fittings
- Conduit Dimensional Data
Flexible Cord and Cable Fittings — Non-Metallic
Gland
Segmented
Chuck
Bushing
Body
2672 Series
NOTE:
Series 5262
Sealing Gasket
(Not provided
with connector)
(C)
(B)
(D)
(A)
Typical Installation
Non-Metallic Liquidtight Flexible Cord
Connectors — Black Beauty
®
Series
Application
• A liquidtight connector to connect
flexible cord to a box or enclosure
and provide adequate strain relief
Features
• Taper Thread hub seals in female
hub (A)
• Neoprene bushing provides liquidtight
installation (B)
• Hand tightens — no tools needed
for assembly
• Segmented chuck provides high
mechanical pullout performance —
will not cut or damage cord jacket (C)
•
Corrosion and weather resistant plastic
is excellent for outdoor/indoor use
•
Plastic parts improve dielectric strength
and provide insulated throat (D)
• Wide range — reduces inventories
Standard Material
Body, Gland & Segmented Chuck . . . . . . . . . .
Weather stabilized thermoplastic rated for -
34° C (-29° F) to 105° C (221° F) application.
Bushing . . . . . . . . . . . . . . . . . . . . . . Neoprene
Standard Finish
All parts as molded.
Range
.250 outside diameter to 1.020 outside
diameter . . . . . . . . Type S, SO, SV, ST, STO,
SJ, SJO, SJT, SJTO,
SVTO, SVO, SVT Flexible
Cords & Cables
Listings/Compliances
UL (UL File No. E-23018)
CSA LR-2884, LR-4484
UL 514B
CSA C22.2 No. 18
NFPA 70-1999 (ANSI)
Federal Standard H-28 (Threads)
2672 Series
A-145
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com