Cut Sheet

Electrical Metallic Tubing (EMT) Fittings
Application
• To connect and effectively bond electrical
metallic tubing to a box or an enclosure
• To provide a rain tight connection between
tubing and the connector
• To couple ends of tubing
Features
• Rugged all steel construction
• Rings designed to positively bond conduit to fitting; unique
locknut design provides effective bond between fitting and
box or enclosure; ground continuity is ensured
• Nylon insulator firmly secured in place — protects
conductors, reduces wire pulling effort and prevents
thread damage in handling
• Locknuts are designed with extended reach to lock
fitting on to a thin box or an enclosure
• Locknuts tighten without deformation; will not vibrate loose
Standard Material
All Steel except Insulator.
Insulator . . . . . . . . . . . . . . . . . . . .Thermoplastic, UL
Rated 105° C
Standard Finish
All Steel Parts . . . . . . . . . . . . . . .Electro Zinc Plated
& Chromate Coated
Insulator . . . . . . . . . . . . . . . . . . . . . . . . .As Molded
Range
Conduit Size…
1
⁄2" thru 2"
Hub Size…
1
⁄2" thru 2" NPS
Hubs provided with straight pipe threads NPS.
Listings/Compliances
UL (UL File No. E-16592)
CSA (LR-4484, LR-8994)
UL 514B
CSA C22.2 No. 18
NFPA 70
NEMA FB1
Federal Specification A-A-50553
Federal Standard H-28 (Threads)
5123 Series 5120 Series
Fittings for Electrical Metallic Tubing (EMT)
Compression Type, Raintight
A-101
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
www.tnb.com