Cut Sheet

Material Selection Ordering Guide
Cable Fastening Systems
Cable Fastening Systems
Table 3 (continued)
WEATHER-
HEAT- DELTEC
®
6.6 WEATHER- 6.6 FIRE- WEATHER- RESISTANT RADIATION-
STABILIZED LOW-SMOKE WEATHERABLE STANDARD RESISTANT RETARDANT RESISTANT POLY- POLY- RESISTANT STAINLESS
6.6 NYLON FLUOROPOLYMER ACETAL 6.6 NYLON NYLON NYLON NYLON 12 PROPYLENE PROPYLENE FLUOROPOLYMER STEEL
AS USED IN AS USED IN AS USED IN AS USED IN AS USED IN AS USED IN AS USED IN AS USED IN AS USED IN AS USED IN AS USED IN
REAGENTS CONCENTRATION TYH SERIES TYV SERIES TYD SERIES TY SERIES TY X SERIES TY FR SERIES TYC X SERIES TYP SERIES TYP X SERIES TYZ SERIES TYS SERIES
Magnesium Nitrate All — E ———— E E E E E
Malic Acid AQ — E ————— E E E E
Mercury 100% — E ———— E E E E E
Methyl Alcohol 100% S E — S S S E E E E E
Methyl Chloride 100% — S ————— S S E E
Methyl Ethyl Ketone 100% — E F — — — E E E E E
Naptha 100% — E ————— E E E E
Nitric Acid 30% NR E NR NR NR NR — E E E E
Nitric Acid 30—70% NR S NR NR NR NR — F F S E
Nitrous Acid 5% — E ————— F F E E
Oieic Acid 100% — E S ———— E E E E
Oxalic Acid 10% — E ———— S E E E E
Paraffin 100% E E — EEEEEEEE
Petroleum Ether 100% — E ———— E F F E E
Phenol 90% NR E NR NR NR NR — E E E E
Phosphoric Acid 10% NR E — NR NR NR — E E E E
Picric Acid 1% — E ————— E E E E
Potassium BromideAQ——————— S S S S
Potassium Carbonate 1% — E ———— EEEEE
Potassium Chlorate AQ — E ———— S E E E E
Potassium Dichromate 40% NR E — NR NR NR F E E E E
Potassium Ferrocyanide 25% — E ————— E E E E
Potassium Hydroxide 5% S E — S S S — E E E E
Potassium Iodide All — E ———— E E E E E
Potassium Nitrate 50% F E — F F F E E E E E
Potassium Permanganate 5% NR E S NR NR NR NR E E E E
Potassium Sulfate 5% — E ———— E E E E E
Potassium Sulfide AQ — E ————— E E E E
Propyl Alcohol 100% E E — E E E — E E E E
Silver Nitrate 10%— E ———— E E E E E
Sodium Acetate 60% E E — E E E — E E E E
Sodium Bicarbonate All E E — EEEEEEEE
Sodium Bisulfate 10% — E E — — — E E E E E
Sodium Borate All — E ————— E E E E
Sodium Carbonate 5% E E S EEEEEEEE
Sodium Chlorate 25% — E E — — — S E E E E
Sodium Chloride 2% E E S EEEEEEEE
Sodium Fluoride 5% ——————— F F F F
Sodium Hydroxide 10% E E S EEEEEEEE
Sodium Hyposulfite AQ — E ——————— E E
Sodium Nitrate 5% E E — EEEEEEEE
Sodium Nitrite AQ — E ———— S E E E E
Sodium Perchlorate 10% — E ——————— E E
Sodium Phosphate 5% — E ———— E E E E E
Sodium Sulfate 5% S E — S EEEEEEE
Sodium Thiosulfate 5% — — S — — — S S S S S
Stearic Acid 100% — E ———— F E E E E
Sulfur 100% — E ———— E E E E E
Sulfur Dioxide All NR E — NR NR NR E E E E E
Sulfuric Acid Conc. NR E NR NR NR NR — S S E E
Sulfuric Acid 5% NR F F NR NR NR F F F F F
Tannic Acid 10% — E ————— E E E E
Tartaric Acid 50% — E E — — — E E E E E
Tetrahydrofuran 100% — F E — — — S F F E E
Toluene 100% E E F EEEEFFEF
Xylene 100% E — EEEEFFEE
Zinc Chloride 70% F E NR F F F E E E E E
Zinc Nitrate AQ — E ———— E E E E E
Zinc Sulfate AQ — E ———— E E E E E
Ratings: E=Excellent S=Satisfactory F=Fair NR=Not Recommended (AQ=Aqueous)
C. Not have any specimens that burn with flaming
or glowing combustion up to the holding fixture.
D. Not have any specimens that drip flaming particles
that ignite the dry absorbent surgical cotton
located 12" below the test specimen.
E. Not have any specimens with glowing combustion
that persists for more than 60 seconds after the
second removal of the test flame.
Materials classed UL94V-2:
A material classed V-2 shall:
A. Not have any specimens that burn with
flaming combustion for more than 30 seconds
after either application of the test flame.
B. Not have a total flaming combustion time
exceeding 250 seconds for the 10 flame
applications for each set of five specimens.
C. Not have any specimens that burn with flaming
or glowing combustion up to the holding fixture.
D. Be permitted to have specimens that drip flaming
particles that burn only briefly, some of which
ignite the dry absorbent surgical cotton placed
12" below the test specimen.
E. Not have any specimens with glowing combustion
that persists for more than 60 seconds after the
second removal of the test flame.
D-13
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Canada
Tel: [phone]
Fax: [phone]
Technical Services
Tel: [phone]
www.tnb.com
tnb06_wrtrm_secd_p12_13 8/9/07 12:41 PM Page D-13