Assembly instructions

2.4 Damper mounting
Loosen the thumbscrew from the damper beam (21) and remove the thumbscrew,
knurled nut and felt washer.
Place the damper beam (21) with the spring on the mounting plate provided
between bar 2 (13) and bar 3 (14). Align the connecting arms (22) so that they point
towards the semitone resonator (16, open tubes).
Reattach the felt washer, knurled nut, and thumbscrew to the damper beam (21)
from below. Tighten the thumbscrew and tension the spring slightly, using the
thumbscrew as a counter.
Press the connecting arms (22) together slightly and attach them to the mounts pro‐
vided on the upper parts (1, 3).
The mounts are located between bar 1 (19) and bar 2 (13) on the wide upper part (1)
and on bar 1 (19) on the side of the narrow upper part (3).
Hook the pedal pull rod (23) to the eyelet on the underside of the damper beam (21).
Lock the pedal pull rod using the double bell.
6
7
7
7
.
/
1
$
.
4
1
7
8
6
8
Setup
THV 3.0
9
Vibraphone