Assembly instructions

Hang the whole-tone resonator (15, closed tubes) between mounts ‘3’ and ‘4’ of the
upper parts (1, 3) as shown.
Hang the semitone resonator (16, open tubes) between mounts ‘1’ and ‘2’ of the
upper parts (1, 3) as shown.
Tighten the drive belt (8) around the motor drive shaft (17) and the two resonator
drive shafts (18) as shown.
Place bar 1 (19) and bar 4 (20) into the mounts provided on the upper parts (1, 3).
When inserting, make sure that the numbers on the bars and mounts of the
upper parts match.
0
1
0
1
)
2
3
3
5
$
Setup
8
THV 3.0
Vibraphone