Quick start guide

EN
Safety instructions
Intended use
This device is used as a table lamp. Any other use or use under other operating con-
ditions is considered to be improper and may result in personal injury or property
damage. No liability will be assumed for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure
that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke! Never let unattended children
use electrical devices.
Where to use the product
Never use the product
• in direct sunlight
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
• near magnetic elds
Piano lamp LED
Quick start guide
This quick start guide contains important information on the safe operation of the
device. Read and follow the safety advice and instructions given. Retain the quick
start guide for future reference. If you pass the device on to others please include
this quick start guide.
Interference with other electrical equipment
Using the device near radios or TV sets may cause interference. Then increase the
distance between the devices.
General handling
• To prevent damage, never use force when operating the switches and controls.
• Never immerse the appliance in water. Just wipe it with a clean dry cloth. Do not
use liquid cleaners such as benzene, thinners or ammable cleaning agents.
Keep foreign substances from the unit!
Keep the device away from containers with liquids. Should any liquid get into the
unit, this could lead to its destruction or re. Be sure not to let any metal objects
into the unit.
Features
• Piano lamp in LED techniques
• with double-tiltable arm
• Length of each arm: 270 mm
• Surface colour: matt platinum
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [e-mail] DocID: 342538_03.12.2020
Using the device
1. Connect the power cable plug to a 230V wall outlet.
2. Press the rocker switch on the base to turn the lamp on or o.
Technical specications
Operating voltage: 230V~ 50Hz
Colour temperature: approx. 3000K (warm white)
Number of LEDs 16×0.5Watt
Base diameter: 140mm
3. Align the lamp head as desired.
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-
terials with your normal household waste, but make sure that they are collected for recy-
cling. Please follow the notes and markings on the packaging.
The plasticiser contained in the rubber mat of this product may possibly react with
the coating of your instrument and after some time cause permanent dark stains. In
case of doubt, do not put the product directly on the instrument, but use felt-pad
protectors or the like.
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal rm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult your local waste
disposal facility.
Reector width: 280mm
Cable length: 4.60m
Energy eciency category: A+