User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Assembly instructions
- 5 Control panel and connections
- 6 Connection options
- 7 Switching on / off and basic operation
- 7.1 Switching the digital piano on
- 7.2 Adjusting the volume
- 7.3 Setting the tone colour
- 7.4 D.A.S (Dynamic Acoustic System)
- 7.5 Touch velocity
- 7.6 Transposing
- 7.7 Tuning
- 7.8 Temperament
- 7.9 Selecting sounds
- 7.10 Layer mode and split point
- 7.11 Metronome
- 7.12 Demo pieces
- 7.13 Tempo
- 7.14 Digital effects
- 7.15 TWINOVA
- 7.16 Recording function
- 7.17 Further setting options
- 7.18 MIDI functions
- 7.19 Operating tone
- 7.20 Factory defaults
- 8 Sound list
- 9 Practise and demo pieces
- 10 Metronome rhythm list
- 11 MIDI implementation chart
- 12 Troubleshooting
- 13 Technical specifications
- 14 Plug and connection assignment
- 15 Protecting the environment
7.17.2 Damper resonance
This function simulates the damper resonance eects with lifted dampers taking
place in an acoustic piano.
On delivery, the damper resonance is activated by default.
1. Hold down [SHIFT] and press piano key [F1] or [G1] to adjust the damper reso‐
nance.
2. Hold down [SHIFT] and press piano key [F#1] to disable the damper resonance.
3. Hold down [SHIFT] and press piano key [F#1] again to enable the damper reso‐
nance again.
This setting is only available for sounds no. 1 … no. 4.
7.17.3 Damper noise
This function simulates the damper noise eects taking place in an acoustic piano
when dampers are lifted and lowered.
On delivery, the damper noise is activated by default.
1. Hold down [SHIFT] and press piano key [A1] or [B1] to adjust the damper noise.
2. Hold down [SHIFT] and press piano key [A#1] to disable the damper noise.
3. Hold down [SHIFT] and press piano key [A#1] again to enable the damper noise
again.
This setting is only available for sounds no. 1 … no. 4.
F1
F#1
G1
ON/OFF
A1
A#1
B1
ON/OFF
Switching on / o and basic operation
DP-28 Plus, DP-28 Plus WH
25