User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Assembly instructions
- 5 Control panel and connections
- 6 Connection options
- 7 Switching on / off and basic operation
- 7.1 Switching the digital piano on
- 7.2 Adjusting the volume
- 7.3 Setting the tone colour
- 7.4 D.A.S (Dynamic Acoustic System)
- 7.5 Touch velocity
- 7.6 Transposing
- 7.7 Tuning
- 7.8 Temperament
- 7.9 Selecting sounds
- 7.10 Layer mode and split point
- 7.11 Metronome
- 7.12 Demo pieces
- 7.13 Tempo
- 7.14 Digital effects
- 7.15 TWINOVA
- 7.16 Recording function
- 7.17 Further setting options
- 7.18 MIDI functions
- 7.19 Operating tone
- 7.20 Factory defaults
- 8 Sound list
- 9 Practise and demo pieces
- 10 Metronome rhythm list
- 11 MIDI implementation chart
- 12 Troubleshooting
- 13 Technical specifications
- 14 Plug and connection assignment
- 15 Protecting the environment
7.14 Digital eects
7.14.1 Reverb and Chorus
With the reverb and chorus functions you can simulate acoustic eects under dif‐
ferent environmental conditions.
On delivery, the reverb and chorus of the respective sound are activated by default.
1. Hold down [SHIFT] and turn on the desired eect with the piano key [C#5]
(reverb) or [F#5 ] (chorus).
2. Hold down [SHIFT] and press [D#5], to set the reverb type (Room or Hall).
3. Hold down [SHIFT] and adjust the eect depth in ten steps using the piano
keys [C5] or [D5] for reverb and [F5] or [G5] for chorus.
7.15 TWINOVA
In TWINOVA mode, the keyboard is divided into two areas with the same sound and
the same pitch to enable four-handed playing, for example in class. The default split
point is between [E4] and [F4].
1. Enabling TWINOVA
Hold down [SHIFT] and press piano key [C#6] to enter the TWINOVA mode.
2. Selecting a sound
The sound selected before input is set as the standard sound for both areas.
If desired, you can choose another sound though (see
Ä
Chapter 7.9 ‘Selecting
sounds’ on page 18).
The layer and split function and the playback of demo pieces are not avail‐
able in TWINOVA mode.
7.16 Recording function
You can record a user song with the digital piano and save the recording in the
internal memory. If you record again, the saved user song will be overwritten.
7.16.1 Recording preparation
To turn on the recording function, press [MODE] repeatedly until the [RECORD]
LED lights up.
C5
D5
F5
G5
C#5 F#5
ROOM/HALL
ON/OFF
ON/OFF
C#6
ON/OFF
Switching on / o and basic operation
DP-28 Plus, DP-28 Plus WH
23