User manual

7.12 Demo pieces
The demo songs incorporated in the digital piano show the sound and the pitch
range of the instrument.
1. Enabling demo pieces
To enable demo piece playback, press [MODE] repeatedly until the [SONG] LED
lights up.
2.
Press to start playing demo pieces.
ð
The LED of the button ashes.
3. Selecting demo pieces
These presets can be adjusted at any time in various ways.
n Press [<] or [>] to select a desired demo in steps of 1 (see
Ä
Chapter 9 ‘Prac‐
tise and demo pieces’ on page 30).
n Hold down [<] or [>] to set the tenth next demo piece.
For example, if the current demo track # 1 is set, press and hold [>] to
set demo track # 11.
n Hold down [SHIFT] and use the piano keys [C3][A3] to enter a three-digit
value to set the desired demo piece directly.
If you want to change the desired demo piece using one of the
piano keys [C3] to [A3], always enter it in three-digit format. For
example, to set the demo track 26, press the piano keys [A3],
[C#3] and [F3] in succession.
4. Adjusting the volume
Hold down [SHIFT] and use the piano keys [D6] or [E6] to adjust the volume.
5. Setting the tempo
All preprogrammed demo pieces contain certain tempo information. You can
set the tempo as described here
Ä
Chapter 7.13 ‘Tempo’ on page 22.
6. Disabling demo pieces
Press to stop playing demo pieces.
Alternatively, press [MODE] to switch to another mode.
ð
The [SONG] LED turns o.
C3
D3
E3
F3
G3
A3
C#3
D#3
F#3
G#3
2
4
7
9
1 3 5 6 8 0
Switching on / o and basic operation
DP-28 Plus, DP-28 Plus WH
21