User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety
- 3 Features
- 4 Installation
- 5 Connections and controls
- 6 Connection options
- 7 Operating
- 7.1 Turning the digital piano on and off
- 7.2 Adjusting the volume
- 7.3 Setting the tone colour
- 7.4 Function menu
- 7.4.1 Tuning
- 7.4.2 Octave transposing
- 7.4.3 Touch velocity
- 7.4.4 Split point setting
- 7.4.5 TWINOVA
- 7.4.6 Harmony mode
- 7.4.7 Equalizer
- 7.4.8 String resonance
- 7.4.9 Soft pedal
- 7.4.10 Freeze
- 7.4.11 Metronome
- 7.4.12 Fade time
- 7.4.13 MIDI out channel
- 7.4.14 Loop function
- 7.4.15 Automatic shutoff
- 7.4.16 Bluetooth®
- 7.4.17 Reset to factory defaults
- 7.5 DSP effects
- 7.6 Transposing
- 7.7 Piano mode
- 7.8 Mixer
- 7.9 Selecting sounds
- 7.10 Layer mode
- 7.11 Split mode
- 7.12 Playing with auto accompaniment
- 7.13 One Touch Setting (O.T.S)
- 7.14 Memory function
- 7.15 MIDI recording
- 7.16 Audio recording
- 7.17 Demo pieces
- 7.18 Practising songs
- 7.19 USB flash drive (USB stick)
- 7.20 MIDI connection
- 8 Style list
- 9 Song list
- 10 Demo pieces
- 11 Chord list
- 12 MIDI implementation chart
- 13 Troubleshooting
- 14 Technical specifications
- 15 Plug and connection assignment
- 16 Protecting the environment
7.19.3 Loading songs
1.
Hold down [USB] to activate the USB menu.
2. Use the rotary control to select the ‘Load MIDI’ menu.
3. Press [>/YES].
ð
The display shows all available tracks in the root directory of the USB ash
drive (USB stick).
4. Select the desired track with the rotary control and press [>/YES] to conrm the
selection.
ð
The display shows ‘Load MIDI Successful!’
.
5. If the selected track does not contain any data, the display shows ‘Overwrite the
User Song?’ . If you want to overwrite the selected track, press [>/YES]. If you
don't want to overwrite the selected track, press [</NO].
6. After the loading process, the display returns to the USB menu.
7.19.4 Formatting
1.
Hold down [USB] to activate the USB menu.
2. Use the rotary control to select the ‘Format USB’ menu.
3. Press [>/YES].
ð
The display shows ‘Format USB Flash Drive?’ .
4. Press [>/YES] to format the USB ash drive (USB stick). Press [</NO] to cancel
the process.
5. After formatting, the display returns to the USB menu.
The process can take some time. Do not switch o the digital piano during
formatting.
7.20 MIDI connection
With MIDI connections, the device that controls another device is called the Master. A
device that is controlled via MIDI is called Slave. The output [MIDI OUT] of the master
is to be connected to the input [MIDI IN] of the slave
Operating
digital piano
52