User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety
- 3 Features
- 4 Installation
- 5 Connections and controls
- 6 Connection options
- 7 Operating
- 7.1 Turning the digital piano on and off
- 7.2 Adjusting the volume
- 7.3 Setting the tone colour
- 7.4 Function menu
- 7.4.1 Tuning
- 7.4.2 Octave transposing
- 7.4.3 Touch velocity
- 7.4.4 Split point setting
- 7.4.5 TWINOVA
- 7.4.6 Harmony mode
- 7.4.7 Equalizer
- 7.4.8 String resonance
- 7.4.9 Soft pedal
- 7.4.10 Freeze
- 7.4.11 Metronome
- 7.4.12 Fade time
- 7.4.13 MIDI out channel
- 7.4.14 Loop function
- 7.4.15 Automatic shutoff
- 7.4.16 Bluetooth®
- 7.4.17 Reset to factory defaults
- 7.5 DSP effects
- 7.6 Transposing
- 7.7 Piano mode
- 7.8 Mixer
- 7.9 Selecting sounds
- 7.10 Layer mode
- 7.11 Split mode
- 7.12 Playing with auto accompaniment
- 7.13 One Touch Setting (O.T.S)
- 7.14 Memory function
- 7.15 MIDI recording
- 7.16 Audio recording
- 7.17 Demo pieces
- 7.18 Practising songs
- 7.19 USB flash drive (USB stick)
- 7.20 MIDI connection
- 8 Style list
- 9 Song list
- 10 Demo pieces
- 11 Chord list
- 12 MIDI implementation chart
- 13 Troubleshooting
- 14 Technical specifications
- 15 Plug and connection assignment
- 16 Protecting the environment
7.11 Split mode
Split mode lets you assign a sound to each hand.
1. Press [LOWER] to activate the split mode.
ð
The display shows ‘L’ and the current sound of the "lower voice" (left
hand).
2. Use the rotary control or [>/YES]/[</NO] to select a desired sound for the
“Lower Voice”. The sound list is available for download on our homepage
www.thomann.de.
Alternatively, you can use one of the direct sound select buttons to select a
preset sound.
3. This feature allows you to select a point that splits the entire keyboard into two
sections and to assign dierent sounds to those sections. The preset split point
is on piano key [F#3].
Hold down [LOWER] and press a desired piano key that you want to be the split
point.
Simultaneously press [>/YES] and [</NO] to restore the standard setting.
4. The ‘R1’ sound cannot be switched o. The ‘R2’ and ‘L’ sounds can be
switched on and o as desired. Press [VOICE] to switch between the selected
sounds.
5. Press [LOWER] again to deactivate the split mode.
You can set the volume for the sounds ‘R1’ and ‘R2’ in the mixer menu (see
Ä
Chapter 7.8 ‘Mixer’ on page 37).
7.12 Playing with auto accompaniment
Auto Accompaniment allows you to play along to one of the available styles on the
digital piano. Depending on the chords you play with your left hand, the auto accom‐
paniment adapts itself. You can also insert an intro, ll and an ending.
Split point setting
Switching sounds
Operating
DP-275 GP BP, DP-275 GP WHP
39