User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety
- 3 Features
- 4 Installation
- 5 Connections and controls
- 6 Connection options
- 7 Operating
- 7.1 Turning the digital piano on and off
- 7.2 Adjusting the volume
- 7.3 Setting the tone colour
- 7.4 Function menu
- 7.4.1 Tuning
- 7.4.2 Octave transposing
- 7.4.3 Touch velocity
- 7.4.4 Split point setting
- 7.4.5 TWINOVA
- 7.4.6 Harmony mode
- 7.4.7 Equalizer
- 7.4.8 String resonance
- 7.4.9 Soft pedal
- 7.4.10 Freeze
- 7.4.11 Metronome
- 7.4.12 Fade time
- 7.4.13 MIDI out channel
- 7.4.14 Loop function
- 7.4.15 Automatic shutoff
- 7.4.16 Bluetooth®
- 7.4.17 Reset to factory defaults
- 7.5 DSP effects
- 7.6 Transposing
- 7.7 Piano mode
- 7.8 Mixer
- 7.9 Selecting sounds
- 7.10 Layer mode
- 7.11 Split mode
- 7.12 Playing with auto accompaniment
- 7.13 One Touch Setting (O.T.S)
- 7.14 Memory function
- 7.15 MIDI recording
- 7.16 Audio recording
- 7.17 Demo pieces
- 7.18 Practising songs
- 7.19 USB flash drive (USB stick)
- 7.20 MIDI connection
- 8 Style list
- 9 Song list
- 10 Demo pieces
- 11 Chord list
- 12 MIDI implementation chart
- 13 Troubleshooting
- 14 Technical specifications
- 15 Plug and connection assignment
- 16 Protecting the environment
7.9 Selecting sounds
The digital piano oers a total of 1200 sounds in 12 categories.
1. Press [VOICE] to activate the sound mode.
ð
The display shows ‘R1’ and the current sound.
2. Use the rotary control or [>/YES]/[</NO] to select a desired sound.
Alternatively, you can use one of the direct sound select buttons to select a
preset sound.
The sound list is available for download on the product page on our
homepage www.thomann.de.
3. Simultaneously press [>/YES] and [</NO] to restore the standard setting.
4. Press [VOICE] again to deactivate the sound mode.
7.10 Layer mode
With the layer mode you can set the "layering" of sounds.
1. Press [DUAL] to activate the layer mode.
ð
The display shows ‘R2’ and the current sound of the second layer (right
hand).
2. Use the rotary control or [>/YES]/[</NO] to select a desired sound for the
second layer. The sound list is available for download on our homepage
www.thomann.de.
Alternatively, you can use one of the direct sound select buttons to select a
preset sound.
3. Simultaneously press [>/YES] and [</NO] to restore the standard setting.
4. Press [DUAL] again to deactivate the sound mode.
Operating
digital piano
38