User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety
- 3 Features
- 4 Installation
- 5 Connections and controls
- 6 Connection options
- 7 Operating
- 7.1 Turning the digital piano on and off
- 7.2 Adjusting the volume
- 7.3 Setting the tone colour
- 7.4 Function menu
- 7.4.1 Tuning
- 7.4.2 Octave transposing
- 7.4.3 Touch velocity
- 7.4.4 Split point setting
- 7.4.5 TWINOVA
- 7.4.6 Harmony mode
- 7.4.7 Equalizer
- 7.4.8 String resonance
- 7.4.9 Soft pedal
- 7.4.10 Freeze
- 7.4.11 Metronome
- 7.4.12 Fade time
- 7.4.13 MIDI out channel
- 7.4.14 Loop function
- 7.4.15 Automatic shutoff
- 7.4.16 Bluetooth®
- 7.4.17 Reset to factory defaults
- 7.5 DSP effects
- 7.6 Transposing
- 7.7 Piano mode
- 7.8 Mixer
- 7.9 Selecting sounds
- 7.10 Layer mode
- 7.11 Split mode
- 7.12 Playing with auto accompaniment
- 7.13 One Touch Setting (O.T.S)
- 7.14 Memory function
- 7.15 MIDI recording
- 7.16 Audio recording
- 7.17 Demo pieces
- 7.18 Practising songs
- 7.19 USB flash drive (USB stick)
- 7.20 MIDI connection
- 8 Style list
- 9 Song list
- 10 Demo pieces
- 11 Chord list
- 12 MIDI implementation chart
- 13 Troubleshooting
- 14 Technical specifications
- 15 Plug and connection assignment
- 16 Protecting the environment
On delivery, the DSP eects are activated by default.
1. Hold down [DSP] to open the menu for the DSP eects settings.
ð
The display shows the current parameters.
2. Use the rotary control to select a desired parameter.
3. Use [>/YES]/[</NO] to select the desired eect.
4. Press [DSP] to deactivate the DSP eects.
The following table shows the possible settings:
Parameter Display Settings
Voice R1 DSP Eect Type R1 DSP TYPE xxx Hall, Room, Crs.Dely, Tp.Delay, Tp.Echo,
Chorus, Flanger, Phaser, Overdriv, Amp,
Metl.Dst, Hard.Dst,Tremolo, Auto.Wah,
Tp.Wah, None(O)
Voice R1 DSP Eect Level R1 DSP LEVEL xxx 0…32
Voice R1 Global Reverb Level Send R1 G.REV SEND xxx 0…32
Voice R1 Global Chorus Level Send R1 G.CHR SEND xxx 0…32
Voice R2 DSP Eect Type R2 DSP TYPE xxx Hall, Room, Crs.Dely, Tp.Delay, Tp.Echo,
Chorus, Flanger, Phaser, Overdriv, Amp,
Metl.Dst, Hard.Dst, Tremolo, Auto.Wah,
Tp.Wah, None(O)
Voice R2 DSP Eect Level R2 DSP LEVEL xxx 0…32
Voice R2 Global Reverb Level Send R2 G.REV SEND xxx 0…32
Voice R2 Global Chorus Level Send R2 G.CHR SEND xxx 0…32
Voice L DSP Eect Type L DSP TYPE xxx Hall, Room, Crs.Dely, Tp.Delay, Tp.Echo,
Chorus, Flanger, Phaser, Overdriv, Amp,
Metl.Dst, Hard.Dst, Tremolo, Auto.Wah,
Tp.Wah, None(O)
Voice L DSP Eect Level L DSP LEVEL xxx 0…32
Voice L Global Reverb Level Send L G.REV SEND xxx 0…32
Voice L Global Chorus Level Send L G.CHR SEND xxx 0…32
Microphone DSP Eect Type MIC DSP TYPE xxx Echo1, Echo2, Echo3, Phaser1, Phaser2,
Enhanc, Wah, Overdv1, Overdv2, Lo-Fi,
Comp, Gate, None(O)
Microphone DSP Eect Level MIC DSP LEVEL xxx 0…32
Microphone Global Reverb Level Send MIC G.REV SEND xxx 0…32
Microphone Global Chorus Level Send MIC G.CHR SEND xxx 0…32
Operating
DP-275 GP BP, DP-275 GP WHP
35