User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety
- 3 Features
- 4 Installation
- 5 Connections and controls
- 6 Connection options
- 7 Operating
- 7.1 Turning the digital piano on and off
- 7.2 Adjusting the volume
- 7.3 Setting the tone colour
- 7.4 Function menu
- 7.4.1 Tuning
- 7.4.2 Octave transposing
- 7.4.3 Touch velocity
- 7.4.4 Split point setting
- 7.4.5 TWINOVA
- 7.4.6 Harmony mode
- 7.4.7 Equalizer
- 7.4.8 String resonance
- 7.4.9 Soft pedal
- 7.4.10 Freeze
- 7.4.11 Metronome
- 7.4.12 Fade time
- 7.4.13 MIDI out channel
- 7.4.14 Loop function
- 7.4.15 Automatic shutoff
- 7.4.16 Bluetooth®
- 7.4.17 Reset to factory defaults
- 7.5 DSP effects
- 7.6 Transposing
- 7.7 Piano mode
- 7.8 Mixer
- 7.9 Selecting sounds
- 7.10 Layer mode
- 7.11 Split mode
- 7.12 Playing with auto accompaniment
- 7.13 One Touch Setting (O.T.S)
- 7.14 Memory function
- 7.15 MIDI recording
- 7.16 Audio recording
- 7.17 Demo pieces
- 7.18 Practising songs
- 7.19 USB flash drive (USB stick)
- 7.20 MIDI connection
- 8 Style list
- 9 Song list
- 10 Demo pieces
- 11 Chord list
- 12 MIDI implementation chart
- 13 Troubleshooting
- 14 Technical specifications
- 15 Plug and connection assignment
- 16 Protecting the environment
7.4.11 Metronome
1.
Press [METRO] to activate the metronome.
ð
The display shows ‘METRO’ and ashes in time.
2.
Hold down [METRO] to enter the metronome settings menu.
3. Use [>/YES]/[</NO] to select the desired beat.
4.
Press [METRO] to deactivate the metronome.
– If you turn on the metronome while a style is playing, it will start with
the next beat and the tempo will adapt to the current style.
– The metronome can be used during a MIDI recording. The sound of the
metronome is not recorded.
– The metronome can be used during an audio recording. The sound of
the metronome is also recorded.
7.4.12 Fade time
This function allows you to set the time for the slow fade in and slow fade out of the
sound.
1. Press [FUNCTION] to call up the functions menu.
2. Use the rotary control to select the ‘FADE TIME’ menu to open the menu for
the fade time settings.
3. Press [>/YES]/[</NO] to set the fade time in a range between 1…20 seconds.
4. Simultaneously press [>/YES] and [</NO] to restore the standard settings.
7.4.13 MIDI out channel
With this function you can set the MIDI out channel for the sound R1.
1. Press [FUNCTION] to call up the functions menu.
2. Use the rotary control to select the ‘MIDI OUT CH’ menu to open the menu for
the MIDI out settings.
3. Press [>/YES]/[</NO] to set a MIDI out channel in a range between 1…16.
4. Simultaneously press [>/YES] and [</NO] to restore the standard settings.
The settings are retained even if the digital piano is switched o.
Operating
digital piano
32