User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety
- 3 Features
- 4 Installation
- 5 Connections and controls
- 6 Connection options
- 7 Operating
- 7.1 Turning the digital piano on and off
- 7.2 Adjusting the volume
- 7.3 Setting the tone colour
- 7.4 Function menu
- 7.4.1 Tuning
- 7.4.2 Octave transposing
- 7.4.3 Touch velocity
- 7.4.4 Split point setting
- 7.4.5 TWINOVA
- 7.4.6 Harmony mode
- 7.4.7 Equalizer
- 7.4.8 String resonance
- 7.4.9 Soft pedal
- 7.4.10 Freeze
- 7.4.11 Metronome
- 7.4.12 Fade time
- 7.4.13 MIDI out channel
- 7.4.14 Loop function
- 7.4.15 Automatic shutoff
- 7.4.16 Bluetooth®
- 7.4.17 Reset to factory defaults
- 7.5 DSP effects
- 7.6 Transposing
- 7.7 Piano mode
- 7.8 Mixer
- 7.9 Selecting sounds
- 7.10 Layer mode
- 7.11 Split mode
- 7.12 Playing with auto accompaniment
- 7.13 One Touch Setting (O.T.S)
- 7.14 Memory function
- 7.15 MIDI recording
- 7.16 Audio recording
- 7.17 Demo pieces
- 7.18 Practising songs
- 7.19 USB flash drive (USB stick)
- 7.20 MIDI connection
- 8 Style list
- 9 Song list
- 10 Demo pieces
- 11 Chord list
- 12 MIDI implementation chart
- 13 Troubleshooting
- 14 Technical specifications
- 15 Plug and connection assignment
- 16 Protecting the environment
All connectors for external devices are located on the connector panel on the bottom
side of the keydesk.
230V~50Hz
F3.15AL250V
V Y
Z
X
W
[ \ ]
52 [PEDAL]
Input socket for the cable from the pedal unit
53 [MIDI IN/OUT/THRU]
MIDI in, output and THRU socket to connect the digital piano to other MIDI devices.
54 [USB]
USB-to-host interface to connect the digital piano to a computer (MIDI data)
55 [MIC]
Input socket for a microphone, designed as 1/4" jack socket
The signal of the connected microphone is reproduced via the built-in loudspeakers of the digital piano.
56 [MIC VOL]
Rotary control to adjust the input volume of the connected microphone.
57 [AUX. IN R/L]
Input sockets for connecting external audio devices such as MP3 player, designed as 1/4" jack sockets
58 [AUX. OUT R / L/MONO]
Output sockets for connecting powered speakers, a stereo system or other ampliers, designed as 1/4" jack sockets
Connect both channels (R and L / Mono) for stereo transmission. Only connect channel (L) for mono transmission.
59 Input socket for the power cable, designed as IEC panel plug with fuse holder
Connections
Connections and controls
DP-275 GP BP, DP-275 GP WHP
21