User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Assembly instructions
- 5 Control panel and connections
- 6 Connectivity options
- 7 Switching on / off and basic operation
- 7.1 Switching the digital piano on
- 7.2 Adjusting the volume
- 7.3 Touch sensitivity
- 7.4 Fine tuning
- 7.5 Split point setting
- 7.6 Metronome
- 7.7 Tempo
- 7.8 Transposing
- 7.9 Resonance effect
- 7.10 Digital effects
- 7.11 Selecting voices
- 7.12 Demo pieces
- 7.13 Demo mode
- 7.14 Dual mode
- 7.15 Duet mode
- 7.16 Harmony mode
- 7.17 Split mode
- 7.18 TWINOVA
- 7.19 Playing with accompaniment
- 7.20 Practising songs
- 7.21 Recording function
- 7.22 Historic tunings
- 7.23 MIDI functions
- 7.24 Factory defaults
- 8 Practise and demo songs
- 9 Styles list
- 10 Voice list
- 11 MIDI implementation chart
- 12 Technical specifications
- 13 Plug and connection assignment
- 14 Protecting the environment
2. Recording with accompaniment
Press the [START/STOP] button in record enable mode to start recording. The
chord mode (A.B.C.) is automatically enabled at the same time.
The recording starts as soon as you play the rst chord in the chord area to the
left of the split point of the claviature (
Ä
Chapter 7.5 ‘Split point setting’
on page 19).
The current recording can be interrupted with [START/STOP] at any time. Then
you have the option to switch to [RECORD] mode again.
7.21.3 Stopping recording
To stop recording, press [RECORD]. The display shows ‘Wait…’
until the recording is
saved.
The recording is automatically stored in the device. The display shows ‘---’ . Once the
saving is complete, the [RECORD] button LED will turn o.
When the full memory capacity has been reached, the recording is termi‐
nated automatically and the recorded data is saved. While storing, the indi‐
cator ashes quickly. The display shows ‘FUL’ .
7.21.4 Playing a recording
1. Use [PLAY/STOP] to switch to the playback mode for user songs.
2. Use [NO] and [YES] to select a recording from the memory ( ‘P-1’ … ‘P-5’ ).
3. Press [PLAY/STOP] to play the user song.
ð
The [PLAY/STOP] button LED lights.
4. Press [PLAY/STOP] again to stop the playback.
ð
The [PLAY/STOP] button LED goes out.
7.21.5 Deleting single recordings
1. Use [PLAY/STOP] to switch to the playback mode for user songs.
2. Use [NO] and [YES] to select a recording you want to delete.
3. Press [RECORD].
ð
The conrmation prompt ‘dEL’ appears in the display.
4. Conrm with [YES] to delete the recording. Press [NO] to cancel the process.
Switching on / o and basic operation
digital piano
30