User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Assembly instructions
- 5 Control panel and connections
- 6 Connectivity options
- 7 Switching on / off and basic operation
- 7.1 Switching the digital piano on
- 7.2 Adjusting the volume
- 7.3 Touch sensitivity
- 7.4 Fine tuning
- 7.5 Split point setting
- 7.6 Metronome
- 7.7 Tempo
- 7.8 Transposing
- 7.9 Resonance effect
- 7.10 Digital effects
- 7.11 Selecting voices
- 7.12 Demo pieces
- 7.13 Demo mode
- 7.14 Dual mode
- 7.15 Duet mode
- 7.16 Harmony mode
- 7.17 Split mode
- 7.18 TWINOVA
- 7.19 Playing with accompaniment
- 7.20 Practising songs
- 7.21 Recording function
- 7.22 Historic tunings
- 7.23 MIDI functions
- 7.24 Factory defaults
- 8 Practise and demo songs
- 9 Styles list
- 10 Voice list
- 11 MIDI implementation chart
- 12 Technical specifications
- 13 Plug and connection assignment
- 14 Protecting the environment
7.8 Transposing
With this function you can adjust the pitch of the claviature in semitone steps one
octave up or down.
1. Press [TRANSPOSE].
ð
The display shows the set value.
2. Use the buttons [NO] and [YES] to adjust the pitch in a range from ‘–05’ … ‘07’ .
3. Press [NO] and [YES] simultaneously to reset the pitch back to factory defaults.
7.9 Resonance eect
This eect simulates the lifting of the damper in an analogue keyboard instrument.
When pressing the keys, the played notes decay more slowly.
1. Press [SHIFT] and [PEDAL RESONANCE] simultaneously to enable the Resonance
eect.
2. Press [SHIFT] and [PEDAL RESONANCE] simultaneously to disable the Resonance
eect again.
When you turn on the digital piano the resonance eect is disabled by
default.
Enabling the resonance eect disables the harmony mode. Enabling during
playing may cause a slight interruption of sound reproduction.
7.10 Digital eects
7.10.1 Reverb and Chorus
With the reverb and chorus functions you can simulate acoustic eects under dif‐
ferent environmental conditions.
1. Keep the [SHIFT] button pressed and turn on the desired eect with the piano
key [ON/OFF] in the [REVERB ] or [CHORUS] area.
2. Keep the [SHIFT] button pressed and adjust the eects depth with the piano
keys [REVERB ] or [CHORUS].
Piano key in the [REVERB] area in the [CHORUS] area
[1] Chamber Slight Chorus eect
[2] Small hall Medium Chorus eect
Switching on / o and basic operation
DP-26
21