User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Assembly instructions
- 5 Connections and controls
- 6 Connection options
- 7 Operating
- 7.1 Turning the digital piano on and off
- 7.2 Adjusting the volume
- 7.3 Setting the tone colour
- 7.4 Split point setting
- 7.5 Metronome
- 7.6 Voices
- 7.7 Songs
- 7.8 Function menu
- 8 Technical specifications
- 9 Troubleshooting
- 10 Voice list
- 11 Song list
- 12 MIDI implementation chart
- 13 Protecting the environment
9 Troubleshooting
Problem Possible causes and solutions
You hear a 'pop' sound from the speakers when switching the
digital piano on and o.
This is normal. No reason for concern.
No sound can be heard when playing the piano. Make sure that the volume control is set appropriately.
The volume of the individual parts Voice R1, Voice R2 and
Voice L may be set too low. Set the volume to an appropriate
level.
Check if headphones are plugged into the headphone output
2. Connecting headphones will mute the speakers of the dig‐
ital piano.
Some notes on the keyboard sound wrong. Set the transposition and octave shift to ‘0’ .
Interference occurs when using a cell phone. Using a mobile phone near the digital piano can cause inter‐
ference. To prevent this, turn o the mobile phone or use it
only at a safe distance.
Troubleshooting
DP-140B U BK, DP-140WH U
33
Digital Piano