User manual

2. Use the rotary control to select ‘ON’ .
ð
The internal sound generator is triggered and MIDI data is output via the
[TO HOST] output.
3. Use the rotary control to select ‘OFF’ .
ð
The internal sound generator is not triggered. The MIDI data is only sent
via the [TO HOST] output.
Make sure all external devices are properly connected.
7.8.13 System settings
1. Hold down [FUNCTION] to call up the system settings.
2. Press repeatedly [FUNCTION] to select a desired parameter that you want to
change.
Alternatively, hold down [FUNCTION] and use the rotary control to select a
desired parameter that you want to change.
3. Use the rotary control to change the desired parameter.
The following table shows the adjustable options and parameters:
No. Option LCD Control range
1 MIDI receive channel ‘MIDI OUT CH’ 1 to 16
2 Automatic shuto ‘POWER OFF’ Never, 30 Min, 1 hour
3 System date: Year ‘YEAR’ 2015 to 2100
4 System date: Month ‘MONTH’ Jan. to Dec.
5 System date Day ‘DAY’ 1 to 31
6 System date Hour ‘HOUR’ 0 to 23
7 System date: Minute ‘MINUTE’ 0 to 59
8 Factory defaults ‘SYSTEM RESET’ No, Execute
7.8.13.1 MIDI channels
1. Press repeatedly [FUNCTION] and select ‘MIDI OUT CH’ .
Alternatively, hold down [FUNCTION] and use the rotary control to select ‘MIDI
OUT CH’ .
2. Use the rotary control to set the MIDI channel for the Part Voice R1 between ‘1’
and ‘16’ .
Operating
30
DP-140B U BK, DP-140WH U
Digital Piano