User manual

7.8.10 Vocal eect
7.8.10.1 Selecting vocal eect
You can use the vocal eect to add acoustic eects to your singing.
Connect a microphone to the connector socket [AUX IN / MIC IN] and set the slide
switch [MIC / AUX IN] to [MIC].
1. Press repeatedly [FUNCTION] and select ‘MIC FX TYPE’ .
Alternatively, hold down [FUNCTION] and use the rotary control to select ‘MIC
FX TYPE’ .
2. Use the rotary control to select a desired eect.
7.8.10.2 Vocal eect depth
1. Press repeatedly [FUNCTION] and select ‘MIC FX LEVEL’ .
Alternatively, hold down [FUNCTION] and use the rotary control to select ‘MIC
FX LEVEL’ .
2. Use the rotary control to set the desired vocal eects depth between ‘0’ and
‘32’ .
The settings for reverb, chorus and vocal eects are automatically saved
when the digital piano is switched o.
7.8.11 Song playback
The songs can be played in three dierent modes.
1. Press repeatedly [FUNCTION] and select ‘SONG LOOP’ .
Alternatively, hold down [FUNCTION] and use the rotary control to select
‘SONG LOOP’ .
2. Use the rotary control to set the desired playback mode ‘Single’ (selected song
in continuous loop), ‘All’ (all songs in continuous loop) or ‘O’ (continuous
loop disabled).
The set playback mode is automatically saved when the digital piano is
switched o.
7.8.12 Keyboard Local ON / OFF
1. Press repeatedly [FUNCTION] and select ‘LOCAL’ .
Alternatively, hold down [FUNCTION] and use the rotary control to select
‘LOCAL’ .
Operating
DP-140B U BK, DP-140WH U
29
Digital Piano