User manual

7.8.2 Octave shift
With this function you can shift the octaves of the Voice R1, Voice R2 and Voice L
parts up and down one octave independently of each other.
1. Press repeatedly [FUNCTION] and select ‘OCTAVE R1’ , ‘OCTAVE R2’ or ‘OCTAVE
L’ for the desired part you want to octave.
Alternatively, hold down [FUNCTION] and use the rotary control to select
‘OCTAVE R1’ , ‘OCTAVE R2’ or ‘OCTAVE L’ .
2. Use the rotary control to move the octave of the selected part up or down.
7.8.3 Touch velocity
With this function you can adjust the touch velocity of the keyboard in six dierent
levels.
1. Press repeatedly [FUNCTION] and select ‘TOUCH’ .
Alternatively, hold down [FUNCTION] and use the rotary control to select
‘TOUCH’ .
2. Use the rotary control to select one of the six possible settings, as shown in the
following table:
Parameter Meaning
1 Hard 2
In this setting, the volume is lower than usual even when
playing with a hard touch.
2 Hard 1
In this setting, the volume is slightly lower than usual even
when playing with a hard touch.
3 Normal
Setting that corresponds to the usual response behaviour of a
Claviature .
4 Soft 1
In this setting, the volume is slightly higher than usual even
when playing with a soft touch.
5 Soft 2
In this setting, the volume is higher than usual even when
playing with a soft touch.
6 Flat
Touch sensitivity is o. This can be very recommendable when
playing the organ voice.
The set velocity is automatically saved when the digital piano is switched
o.
Operating
26
DP-140B U BK, DP-140WH U
Digital Piano