User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Assembly instructions
- 5 Connections and controls
- 6 Connection options
- 7 Operating
- 7.1 Turning the digital piano on and off
- 7.2 Adjusting the volume
- 7.3 Setting the tone colour
- 7.4 Split point setting
- 7.5 Metronome
- 7.6 Voices
- 7.7 Songs
- 7.8 Function menu
- 8 Technical specifications
- 9 Troubleshooting
- 10 Voice list
- 11 Song list
- 12 MIDI implementation chart
- 13 Protecting the environment
10. Press [START / STOP] or [REC] again to stop recording.
ð
The recording will be saved to the selected location for the user song. The
display shows the memory location.
11. Press [START / STOP] to play the recording.
When the full storage capacity is reached, the recording is automatically
ended and the display shows ‘USB ash drive is full!’ . The recorded data will
be saved in the selected memory location.
7.8 Function menu
This menu is used to set the various parameters oered by the digital piano.
1. Press [FUNCTION] to call up the functions menu.
ð
The display shows ‘OCTAVE R1’ each time it is called up.
2. Press repeatedly [FUNCTION] to select a desired parameter that you want to
change.
Alternatively, hold down [FUNCTION] and use the rotary control to select a
desired parameter that you want to change.
3. Use the rotary control to change the desired parameter.
Operating
24
DP-140B U BK, DP-140WH U
Digital Piano