User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Assembly instructions
- 5 Connections and controls
- 6 Connection options
- 7 Operating
- 7.1 Turning the digital piano on and off
- 7.2 Adjusting the volume
- 7.3 Setting the tone colour
- 7.4 Split point setting
- 7.5 Metronome
- 7.6 Voices
- 7.7 Songs
- 7.8 Function menu
- 8 Technical specifications
- 9 Troubleshooting
- 10 Voice list
- 11 Song list
- 12 MIDI implementation chart
- 13 Protecting the environment
7.6 Voices
7.6.1 Selecting voices
The digital piano oers 40 voices. This allows you to play a voice with your right
hand.
1. Press [VOICE] to enable the Voice mode.
ð
The display shows the name and number of the rst right hand voice (main
voice Voice R1).
2.
Use the rotary control to select a desired voice (see
Ä
Chapter 10 ‘Voice list’
on page 34).
3. Press [VOICE DEMO] to play the selected voice as a demo.
In dual and split mode, you can switch between the rst and second voice of the
right hand (Voice R1, Voice R2) and the voice of the left hand (Voice L) by repeatedly
pressing the [VOICE] button. The display shows the selected voice.
7.6.2 Dual mode
In Dual mode, you can play two voices simultaneously.
1.
First select the rst right-hand voice (Voice R1) as described under
Ä
Chapter
7.6.1 ‘Selecting voices’ on page 19.
2. Press [DUAL] to switch to Dual mode and activate the second right hand voice
(Voice R2).
3. Use the rotary control to select a desired voice that you want to assign to the
second voice of the right hand (Voice R2).
ð
The currently set voices appear in the display. If you now press a key, both
voices sound simultaneously.
4. To change the combination of voices, press repeatedly [VOICE] to toggle
between the rst and second right hand voices. Then use the rotary control to
select the desired voice.
5. Press [DUAL] again to exit the Dual mode.
Operating
DP-140B U BK, DP-140WH U
19
Digital Piano