User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Assembly instructions
- 5 Connections and controls
- 6 Connection options
- 7 Operating
- 7.1 Turning the digital piano on and off
- 7.2 Adjusting the volume
- 7.3 Setting the tone colour
- 7.4 Split point setting
- 7.5 Metronome
- 7.6 Voices
- 7.7 Songs
- 7.8 Function menu
- 8 Technical specifications
- 9 Troubleshooting
- 10 Voice list
- 11 Song list
- 12 MIDI implementation chart
- 13 Protecting the environment
*
+
5. Place the digital piano case (1) on the frame and fasten it with six screws
6 ´ 18BM (9) and the two thumbscrews (10) to the side panels.
,
-
6. Fasten the headphone holder (12) with two screws 3 × 8BM (11) on the under‐
side of the digital piano housing.
7. Insert the DIN plug of the pedal cable (13) into the provided socket on the
bottom side of the digital piano housing. Insert the mains plug (14) into the
provided socket on the rear panel of the digital piano housing. Fix the cables to
the base and move the digital piano to the desired position.
1. Make sure that the device is turned o before you connect it to the power
supply or disconnect it.
2.
Turn the volume control to minimum ( ).
3. Plug the power cord into a 230 V AC outlet.
4.
Press to turn the digital piano on.
ð
The display shows ‘Loading.....’ .
If the digital piano is not in use or when a thunderstorm with danger of
lightning threatens, disconnect the device from its mains power for safety.
Mains connection
Assembly instructions
DP-140B U BK, DP-140WH U
11
Digital Piano