User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Assembly instructions
- 5 Connections and controls
- 6 Connection options
- 7 Operating
- 7.1 Turning the digital piano on and off
- 7.2 Adjusting the volume
- 7.3 Setting the tone colour
- 7.4 Split point setting
- 7.5 Metronome
- 7.6 Voices
- 7.7 Songs
- 7.8 Function menu
- 8 Technical specifications
- 9 Troubleshooting
- 10 Voice list
- 11 Song list
- 12 MIDI implementation chart
- 13 Protecting the environment
1. Set up the digital piano near a power wall outlet.
2. Proceed according to the illustrations and only use the supplied screws. Using
other screws could damage the piano housing or result in a reduced stability of
the piano.
'
(
'
)
$
#
%
3. Put the pedal box (4) between the left (2) and right (3) side panel and use two
screws M6 × 40 (6) on each side to ax both side panels to the pedal box.
Attach the six plastic caps (7).
)
&
4. Fasten the rear panel (5) to the pedal box and the side panels with ten screws
4 × 15PA (8).
Mechanical assembly
Assembly instructions
10
DP-140B U BK, DP-140WH U
Digital Piano