Combo 61 Desk Assembly Manual
STEP 1 h A 13 4 heights 13 1st 90 mm 2nd 110 mm 3rd 130 mm 4th 150 mm 10 9 8 7 2 Use plastic insert type I 6 C Use screws Type S D Use screws Type S 1/2 1/2 5 4 3 12 11 1 1/2 1/2 B
STEP 2 Push wooden dowels type W in the appropriate holes STEP 3 5 2 3 1 Type F
STEP 4 STEP 5 Use screws Type E 3 3 4 Use hex wrench to screw Tighten the screw until it is even with the particle board Use screws caps
STEP 7 Use screws Type E STEP 6 5 3
STEP 9 Use screws Type A (x6) STEP 8 6
STEP 10 STEP 12 9 8 10 7 9 STEP 11 8 7 6
STEP 13 Use screws Type A (x3) STEP 14 Use screws Type D (x3) A D A D A 11 D correct position STEP 15 Use screws Type E 12 11 12 up 11
STEP 17 STEP 16 Fix Rack Rail 11+12 with screws Type RS
If you don't need the rack units don't fix the rack rails and use the pieces number 13 to close the holes PACKING LIST: x27 Type 35 W E Type x9 Type A x3 Type D mm Wooden dowels x24 x17 Type I m6x30 mm Euro Screws x4 Type R x8 Type m6x100 mm Rs x24 Type Ru 13 Rack rail Plastic insert 13 x6 Type 3.
