MSDS

Product name: L.L.R.
Issue Date: 29.05.2015
Revision Date: 29.03.2016
Version: 2.0
Print date:: 29.03.2016
SDS_DE - EN - 000000000600863647
4/9
General information:
Wash hands before breaks and after work. Use personal protective
equipment as required. Personal protection equipment should be chosen
according to the CEN standards and in discussion with the supplier of the
personal protective equipment. The usual precautionary measures should
be adhered to inhandling the chemicals or the mineral oil products.
Eye/face protection:
Safety glasses (EN 166) recommended during refilling.
Skin protection
Hand Protection:
Material: Nitrile butyl rubber (NBR). Min. Breakthrough time: >= 480 min.
Recommended thickness of the material: 0,38 mm Avoid long-term and
repeated skin contact. Suitable gloves can be recommended by the glove
supplier. Use skin protection cream for preventive skin protection.
Protective gloves, where permitted in acc. to safety directions. The exact
break through time has to be found out by the manufacturer of the
protective gloves and has to be observed.
Other:
Do not carry cleaning cloths impregnated with the product in trouser
pockets. Wear suitable protective clothing.
Respiratory Protection:
Do not breathe dust/fume/gas/mist/vapors/spray. Provide adequate
ventilation. In case of inadequate ventilation wear respiratory protection.
Filter A/P2.
Thermal hazards:
Not known.
Hygiene measures:
Always observe good personal hygiene measures, such as washing after
handling the material and before eating, drinking, and/or smoking. Routinely
wash work clothing to remove contaminants. Discard contaminated
footwear that cannot be cleaned.
Environmental Controls:
No data available.
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance
Physical state:
liquid
Form:
Pump spray with sealed spray attachment
Color:
Colorless
Odor:
Characteristic
Odor Threshold:
Not applicable for mixtures
pH:
5,5 (DIN 19268, 20 °C)
Freezing point:
> 0 °C
Boiling Point:
> 80 °C
Flash Point:
> 35 °C (DIN EN ISO 2719)
Evaporation Rate:
Not applicable for mixtures
Flammability (solid, gas):
Value not relevant for classification
Flammability Limit - Upper (%)–:
Not applicable for mixtures
Flammability Limit - Lower (%)–:
Not applicable for mixtures