User's Guide

Brand: THLight

Model Name: W8010R

Product Name: SENTINEL

W8010R

Fig.1 Positive product photos。

Fig. 2 Product photos on the back of the product。In the center are 2 USB jacks and one

RJ45 jack. The right side is the power cord jack

User Guide

Sentinel (USBeacon W8010R) is a beacon receiving locator used by Sentinel indoor

positioning system. The product has Bluetooth reception, signal analysis processing and

calculation, and transmits preliminary positioning information to the designated server via

WiFi or RJ45 for positioning analysis.

Power on: The product does not need a power button, after directly plugging in the power

cord and supplying power, the power can be turned on.

Settings: Use Sentinel Cong APP to make related settings.

Fig. 3 Sentinel Config APP setting screen.

PAGE 1
Brand: THLight Model Name: W8010R Product Name: SENTINEL W8010R Fig.1 Positive product photos。 Fig. 2 Product photos on the back of the product。In the center are 2 USB jacks and one RJ45 jack. The right side is the power cord jack User Guide Sentinel (USBeacon W8010R) is a beacon receiving locator used by Sentinel indoor positioning system.
PAGE 2
NCC warning: The low-power RF motor that has passed the type certification is not approved, and the company, company or user shall not change the frequency without authorization Rate, increase power or change the original design features and functions. The use of low-power RF motors must not affect flight safety and interfere with legal communications; when interference is found, it should be immediately Stop using it and improve it to no interference before continuing to use it.
PAGE 3
-Consult the dealer or an experienced radio/ TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.