User's Manual

When calibration is complete, use the “Set RSSI”
button at the bottom right to set new RSSI value
as RSSI Value at 1 meter. Be sure to save changes
in the main Calibration UI when pop screen is
closed.
If there were any abnormal interference or if the
placement of smart device is incorrect in
anyway, hit “Start Over” to calibrate RSSI again.
7. Beacon Configuration - Calibration
USBeacon
USER MANUAL FOR ANDROID PLATFORM
Pg 06 / 06
© 2015 THLight Co. Inc.
iBeacons have many useful applications, and most of these applications will require accurate RSSI-to-distance
settings in order to trigger the corresponding broadcast/actions at disired distance. Although THLight’s
USBeacon series all have extremely stable signals (RSSI values), they will still require a calibration if installed at
dierent heights or in environments with high level of interference.