User's Manual
USBeacon
USER MANUAL FOR ANDROID PLATFORM
Pg 05 / 06
© 2015 THLight Co. Inc.
6. Beacon Configuration - Power Management
While the beacon will function ne with factory power settings, changing its power settings according to
your specic needs will allow the beacon to work with optimal eciency.
BACK / Returns to “Beacons Detected” page
without saving any changes made.
Tx Power / Allows user to adjust signal strength;
more energy (shorter battery life) is required for
stronger signals.
Broadcast Frequency / User may use either X
times per second or X milliseconds per broad-
cast to change beacon’s broadcast frequency;
more energy (shorter battery life) is required for
more frequent broadcasting. (Min = 1, Max = 30,
times per sec.)
BLE Mode / This setting is for previous beacon
models only; it is disabled automatically if you
are running a new version beacon.
Old beacons will not immediately begin its
broadcast once switched on. Instead, it stays in
BLE mode for a period of time dictated by the
power management setting here. During this
time, the beacon is open for connection to your
smart device. After this period of time, the
beacon will return to broadcast mode and
changes will not be possible. To enter BLE
mode, please manually switch beacon o and
on again.
REMAINING BATTERY LIFE / This is an estimated
remaining battery life calculated with power
settings above. It serves to help user in assess-
ing the type of the power settings that is most
ecient.