User's Manual

USBeacon
USER MANUAL FOR ANDROID PLATFORM
Pg 04 / 06
© 2015 THLight Co. Inc.
5. Beacon Configuration - Beacon Information
Once you have selected a beacon to proceed with setup, there are minor dierences as to what to do next
depending on the status of the beacon:
NAME / User may name each beacon freely as a
reminder of its function or location; name must
be within 24 characters.
MAC / Obtained from beacon itself; cannot be
changed.
UUID / Obtained from server end; cannot be
changed.
MAJOR & MINOR / Can be values anywhere from
0 ~ 65535.
Indicates that beacon is powered by battery;
remaining battery life is represented with bars (3
= full).
Indicates that beacon is powered by USB.
NOTES / Allows user to enter any notes (function
not activated yet as of 2015.08, coming soon).
RESET TO FACTORY SETTINGS / Restore all
beacon settings back to factory settings.
*Warning: Customized settings will not be able
to be restored once a beacon is reset.
SAVE CHANGES / Saves all changes made and
reboots beacon.
BACK / Returns to “Beacons Detected” page
without saving any changes made.