User's Manual
4. Creating new beacon profile or link profiles to beacon.
Once you have selected a beacon to proceed with setup, there are minor dierences as to what to do next
depending on the status of the beacon:
If you have not used the server to create
beacon proles already, choose “Create New
Beacon” to enter setup to create your beacon’s
prole.
If you have used the server to create beacon
proles already, the proles will show up under
the Create New Beacon tab (requires internet
connection to sync proles from server).
Select the desired prole to make a link from
prole to beacon.
Beacon Cong / You will reach this page either
by the A or B route above. Or, if your beacon
has been congured previously, upon your
selection from the “Beacons Detected” page,
the system will automatically jump to this
page since your beacon has already been
linked to a prole.
USBeacon
USER MANUAL FOR ANDROID PLATFORM
Pg 03 / 06
© 2015 THLight Co. Inc.