User's Manual
46
â“’ 2019. this is engineering Inc. All Rights Reserved.
6. If the ring is out of the sensing range of the controller, the controller vibrates once
and the drone automatically switches to hovering.
7. You can switch between assist mode and a free flight mode by holding the jog
button during flight for over one second until the controller vibrates. Free flight
mode is selected by default when the controller is initially paired with the drone.
When the drone and controller are re-paired, the flight mode initializes into free
flight mode.
Assist mode: The drone maintains a constant speed and altitude. This mode is useful if you
are unfamiliar with controlling the drone or need to shoot a video under stable conditions.
When switched to assist mode, the drone maintains the previous flight altitude, which may be
adjusted by moving the control ring up or down. Note that there is no vibration feedback for
control range in assist mode.
Free flight modes: The flight direction and altitude are set according to the movement of the
control ring. These modes allow greater precision and degree of freedom in flight control.
To prevent unintended loss of control over the aircraft during flight, the controller warns the user by vibrating at
different levels as the ring approaches the detection limit.
The controller’s range of ring detection may change unpredictably depending on surrounding sources of
electromagnetic interference, and this may hinder flight control.