User's Manual

29
SHIFT RED User Manual
ⓒ 2019. this is engineering Inc. All Rights Reserved.
Firmware updates are provided to optimize the performance of SHIFT RED. Update
the controller to the latest firmware by following the procedure below:
1. From the download page (www.thisiseng.com/support/download/) of the SHIFT
website, download the controller firmware and update software.
2. Turn off the controller, and connect to a PC using the USB cable while holding the
jog button pressed.
3. Once the software detects the controller, you can proceed with the firmware
update as guided by the software. Keep the USB cable connected while updating.
Do not remove the USB cable before the update is complete.
4. When the firmware update is complete, the controller automatically enters the
charging state. The USB cable can be removed now.
Firmware Updates