User's Manual

25
SHIFT RED User Manual
ⓒ 2019. this is engineering Inc. All Rights Reserved.
Powering On / Pairing with the Aircraft
The controller calibrates automatically whenever it is powered on.
The automatic calibration process optimizes controller performance by assessing
the surroundings in order to detect fine movement of the control ring. With every
change in the place of flight, users are recommended to turn the controller off and
on again, thereby recalibrating to optimize control sensitivity.
1. Before turning on, place the controller ring at least 30 cm (1.0 ft) away from the
controller stick.
If the control ring is within 30 cm (1.0 ft) of the controller during automatic calibration, you may be unable to
control the drone or experience serious errors.
04
HANDLING THE CONTROLLER