User's Manual

SHIFT RED User Manual

· Always use genuine SHIFT LiPo batteries.

· Inspect batteries before charging or use.

· If a battery has been shocked, or if you notice abnormal smell, heat, discoloration,

deformation, or signs of leakage from it, never charge or use the defective battery.

Precautions on Managing Drone and Controller Batteries

· In particular, a high density of Wi-Fi APs may disturb communications between the

drone and application. Before using the application, check your Wi-Fi environment.

· When the drone is flying over a dark (below 300 lux) or extremely bright (over 100,000

lux) surface, or toward a bright light source, its flight performance may be affected.

Check the surrounding brightness before operating the drone.

· The drone may not work properly when flying over highly reflective surfaces such

as water- or snow-covered areas, or when flying in dark.

· Exercise caution right after flight as the motor and aircraft are heated up from operation.

· Using the controller in the proximity (within 30 cm

[1.0 ft]) of other rings, metallic objects or magnetic

materials, near electronic devices that employ wireless

communication or run on motors, inside a steel-

framed building, or within the influence of a utility pole

or a wireless station may affect the detection range of

the controller and controllability of the drone.