User Guide
7
Direct Front View
Main Buttons Controls:
The Three Buttons are “Power”, “Home/Back”, and “Select”
1.) Power On: Short Press (click) the Power button to turn on. You
will see the White LED light turn on immediately & hear the haptic
buzzer make a noise. The X2 displays will turn on a few seconds
later. If the white LED or displays do not turn on that means
battery is low- connect to your provided Charger.
2.) Enter Sleep Mode: While your X2 displays are on, short press the
Power Button to enter sleep mode. The displays turn off in Sleep
mode. In Sleep mode, the device is not off only the displays are.
Exit Sleep Mode: Short Press the Power button again to exit Sleep
mode.
3.) Power off: While your X2 is on, long press (click & hold for ~3
seconds) On/Off (Power) button to turn the system off. You will
see a pop-up with the message “Shutting Down” indicating the X2
is shutting down automatically.
4.) Power Reset: Press and hold the Power button for ~30 seconds to
force a power reset. When doing a hard power reset doahard
powerresetthat thedevicecan'tbepluggedintoachargeror
computeratthattime