User's Manual

④
Tap device icon to enter the device page, tap the setting icon to enter the settings page, you
can edit the name of the sensor; Or you can create routines with the sensor to control other
connected devices.
Pairing with SmartThings
App: SmartThings App
Devices: SmartThings Hub 2nd Gen(2015) & 3rd Gen.(2018), Aeotec Smart Home Hub.
①
Before pairing, check for updates to make sure the SmartThings Hub firmware is up to date.
②
Remove the plastic stand on the back of the Temp & Humidity Sensor carefully, open the
battery cover on the back, remove the plastic insulation sheet and the sensor is powered on; Or