User's Manual

Setting up
Initializing Temp & Humidity Sensor
Power on: Remove the plastic stand on the back of the Temp & Humidity Sensor carefully, open
the battery cover on the back, remove the plastic insulation sheet and the sensor is powered
on,the blinking cloud icon on the the LED screen indicates the sensor is in pairing mode.
1
Pairing mode: press and hold the reset button on the left side of the sensor for 5 seconds and
release the hold, the blinking cloud icon
切 图
on the LED screen indicates the sensor is in
pairing mode.
2
Follow the on-screen instructions to set up your Temperature & Humidity Sensor.
Pairing with THIRDREALITY
Hub: Third Reality Smart Hub
App: Third Reality App
Pair the Temp & Humidity sensor with Third Reality Smart Hub.
Pairing
1
Register and sign in your THIRDREALITY account, and add the THIRDREALITY hub.
2
Remove the plastic stand on the back of the Temp & Humidity Sensor carefully, open the
battery cover on the back, remove the plastic insulation sheet and the sensor is powered on; Or
press and hold the reset button on the left side of the sensor for 5 seconds and release the hold;
The blinking cloud icon on the the LED screen indicates the sensor is in pairing mode.
3
Tap “+” in the upper right in THIRDREALITY App, scroll down to choose the Temp & Humidity
Sensor Icon and follow the on-screen instructions to start the pairing process.