Temperature & Humidity Sensor User Manual
Index 1. Product Overview 2. Installation 3. Reset Button 4. Specifications 5. Setting up 6. Pairing with THIRDREALITY 7. Pairing with Amazon Echo 8. Pairing with SmartThings 9. Pairing with Hubitat 10.
Product Overview Front View Rear View Installation Reset Button 1 Press and hold the reset button on the left side of the sensor for 10 seconds and release the hold. 2 Single press the reset button to switch the temperature display between Celsius and Fahrenheit . Specifications Name Temperature and Humidity Sensor Model 3RTHS24BZ LED Screen 48.5mm x 41.0 mm Dimensions 6.15cmx6.15cmx1.
Setting up Initializing Temp & Humidity Sensor Power on: Remove the plastic stand on the back of the Temp & Humidity Sensor carefully, open the battery cover on the back, remove the plastic insulation sheet and the sensor is powered on,the blinking cloud icon on the the LED screen indicates the sensor is in pairing mode.
4 The sensor will be discovered within one minute as “Temperature and Humidity Sensor 1” , the temperature and humidity data will be displayed in the device list . ⑤ Tap the Temp & Humidity Sensor icon to enter the device page, you can see information like the MAC address, battery level, software version and history records etc, you can also rename the Temp & Humidity Sensor, and check for software updates.
Pairing with Amazon Echo App: Amazon Alexa App Devices: Echo devices with built-in ZigBee hubs such As Echo V4, Echo Plus V1 & V2, Echo Studio, Echo Show 10, and Eero 6 & 6 pro. ① Ask Alexa to check for updates before pairing.
④ Tap device icon to enter the device page, tap the setting icon to enter the settings page, you can edit the name of the sensor; Or you can create routines with the sensor to control other connected devices. Pairing with SmartThings App: SmartThings App Devices: SmartThings Hub 2nd Gen(2015) & 3rd Gen.(2018), Aeotec Smart Home Hub. ① Before pairing, check for updates to make sure the SmartThings Hub firmware is up to date.
press and hold the reset button on the left side of the sensor for 5 seconds and release the hold; The blinking cloud icon on the the LED screen indicates the sensor is in pairing mode. ③ Open the SmartThings App, tap “+” on the upper right corner to ”Add device” and then tap “Scan” to “Scan for nearby devices”. ④ The Smart Button will be paired with the SmartThings hub in a few seconds. ⑤ Create routines to control connected devices. Pairing with Hubitat Website: http://find.hubitat.
③ Click Start ZigBee Pairing button after you select a ZigBee device type, the Start ZigBee Pairing button will put the hub in ZigBee pairing mode for 60 seconds. ④ After pairing process is completed successfully, you can rename it if needed. ⑤ Now you can see the Temp & Humidity Sensor on the Devices page.
Pairing steps： ① Remove the plastic stand on the back of the Temp & Humidity Sensor carefully, open the battery cover on the back, remove the plastic insulation sheet and the sensor is powered on, the blinking cloud icon on the the LED screen indicates the sensor is in pairing mode. ②Make sure Home Assistant Integrations ZigBee Home Automation Setup is ready, then go to “Configuration” page, click “integration”. ③Then click the “Devices” on the ZigBee item, the click “Add Devices”.
④After the pairing is completed successfully, it will show up in the page. ⑤Back to “Devices” page, then you can find the Temp & Humidity Sensor added. ⑥Click to enter in the control interface to set the Temp & Humidity Sensor. ⑦Click “+” belongs to Automation and then you can add different actions.
Limited Warranty For limited warranty, please visit www.3reality.com/devicesupport For customer support, please contact us at info@3reality.com or visit www.3reality.com For help and troubleshooting related to Amazon Alexa, visit the Alexa app. FCC STATEMENT: This device complies with part 15 of the FCC Rules.
INDUSTEY CANADA STATEMENT(French): Cet appareil est conforme aux normes RSS exemptes de licence d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d'interférences nuisibles et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l'appareil. De plus, cet appareil est conforme à la norme ICES-003 des règles d'Industrie Canada (IC).
