X500 User Manual This Dashboard Camera (dash cam) is a specialized onboard device that continuously records video while the vehicle is in use. Some features may not be available depending on installation, driving conditions, and vehicle type. The video quality might vary for each device as a result of installed firmware.
Contents Before Using THINKWARE DASH CAMTM X500 FCC Statement Caution 01 Getting Started 02 Basic Operations 03 LCD Display 04 PC Application 05 Product Specifications 1-1. In the Package 1-2. Optional Accessories 1-3. Product Overview 1-4. Inserting a Memory Card 1-5. Vehicle Installation 2-1. Turning the Device Power On/Off 2-2. Road Safety Warning System 2-3. Recorded Files 2-4. Recording Videos While Driving 2-5. [Optional] Recording Videos While Parked 2-6. Manual Recording 2-7.
Before Using THINKWARE DASH CAMTM X500 ▶ Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of THINKWARE. ▶ Every effort has been made to ensure this Guide's accuracy. However, we cannot guarantee the accuracy of the contents in this document as there may be technical errors, omissions, and/or futures changes.
01 This device is designed to record video while the vehicle is in operation. The quality of the video might be affected by weather conditions and the road environment such as day or night, presence of street lighting, entering/exiting tunnels, and surrounding temperatures. THINKWARE is NOT responsible for the loss of any recorded video during operation.
1. Getting Started This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to insure compliance. 1-1. In the Package Main Dash Cam Unit Mount with 3M tape (1ea) MicroSD memory card with adapter (consumable) USB MicroSD card reader 1-2.
01 7 1 micro SD 4 8 Front view Rear view Right view Top view micro SD 3 micro SD 2 Getting Started 1-3. Product Overview 5 6 9 10 12 micro SD 11 No.
1-4. Inserting a Memory Card 1-4-1. About Memory Cards UHS MicroSD card must be used with a storage capacity of 16GB, 32GB, or 64GB. It is strongly recommended that minimum 16GB memory card is used for full HD recording. The MicroSD card should be formatted every 2 weeks to maximize the lifetime of the memory card. 1-4-2.
01 Getting Started 1-5. Vehicle Installation 1-5-1. Connecting the Device and the Mount ① Place the mount so it is aligned with the connector (A), and push it toward (B) until it clicks into place. ② Remove the protective film from the camera lens. 1-5-2. Installing the Device ① Clean the area on the windshield where the dash cam will be installed. ② With dash cam main unit still attached to the mount, remove the protective tape from the back of the mount.
1-5-3. Connecting to power ① Connect the power cable to DC-IN socket of the device. ② Plug the charger adapter end of the power cable into a 12V DC vehicle power socket. ③ Arrange the wire by using the adhesive cable holder as shown below. ④A djust the camera so that the dash cam is facingforward and level with the road. TIP After installation, turn on the dash cam and use the live view on the LCD screen to adjust the camera angle.
02 Basic Operations 2. Basic Operations 2-1. Turning the Device Power On/Off The device will automatically turn on and off with vehicle ignition. Power cable for vehicle To manually turn the device on/off, press and hold the Power button ( ) for 3 seconds.
2-2. Road Safety Warning System Using embedded GPS and road data, related road safety information will be notified to the driver Alert will be displayed on the LCD screen when approaching nearby points of interest. Resetting GPS ┗ B uilt-in Internal GPS can be reset by selecting “Main Menu > About Device > GPS Info > Reset GPS” Cautions This feature may not be available in some countries. G PS may be affected by weather conditions, satellite signal, and/or surrounding geographical features.
02 Basic Operations 2-3. Recorded Files Recorded video files are saved in the folder by date and hour in the MicroSD card. ┗ Files are created based on the time when the videos are recorded. Year Month Day Hour Second Minute Front view recording Rear view recording (optional rear view camera must be installed) s a surveillance product, the dash cam will automatically A overwrite oldest file in the memory card once the memory is full.
2-4. Recording Videos While Driving 2-4-1. Continuous Recording Mode Videos are recorded in 1 minute segments and saves as files in the MicroSD card under folder named “cont_rec”. 2-4-2. Incident Recording in During Continuous Recording Mode When the dash cam detects impact, it will immediately store the previous 10 seconds prior to impact and start recording video for next 10 seconds. This 20-second video will then be saved in a secure location on the MicroSD card under folder named “evt_rec”.
02 Basic Operations 2-4-3. Dual SaveTM (Internal Memory Backup) Dual Save is a Thinkware proprietary technology that utilizes built-in memory as secure backup in addition to the MicroSD memory card. Dual Save technology guarantees incident video recording using internal memory in case of an accident that causes damage to the MicroSD memory card.
2-5. [Optional] Recording Videos While Parked This feature is available only when the dash cam has been hardwired directly to the vehicle battery. Separate purchase for the hardwiring cable accessory and professional installation is required. 2-5-1.
02 Basic Operations 2-6. Manual Recording In addition to recording accidents, the dash cam allows the user to initiate manual recording mode to capture scenery and/or places while driving. This feature can also be used to save video as witness where the installed vehicle is not directly involved in an accident. Video files saved during manually recording mode are stored in a separate location on the memory card and will be protected from video overwriting in continuous recording mode.
2-7. Formatting MicroSD Card Select “Memory Card Format” menu located at "Mem Card Settings > Memory Format". Cautions The MicroSD card should be formatted every 2 weeks to maximize the lifetime of the memory card. 2-8. Upgrading Firmware T he system will automatically be updated if the MicroSD card contains the firmware upgrade file. The device restarts automatically after the upgrade has been completed. M ake sure your device is always up to date with latest firmware.
03 LCD Display 3. LCD Screen 3-1.
3-2. Live View LCD screen can be used to verify current recording view.
03 LCD Display 3-3. File List Recording will suspend when browsing through video list and settings menu. Visual notification will appear on the screen to confirm the suspension of recording prior to entering the menu. 3-3-1.
3-3-2. File List - 2 Recording will stop when accessing on-screen menu.
03 LCD Display 3-4.
3-5.
03 LCD Display 3-6. Settings > Camera Settings Brightness-F/R: Sets the video recording brightness for front/rear camera Wide Dynamic Range : S ets the WDR mode to record clear video even under large variation of backlightingillumination.
3-7. Settings > Continuous Recording Settings Impact Sensitivity: Sets the impact sensitivity level Road Safety Warnin: Sets audible notifications for road safety warnings Cautions Tips on sensitivity It is recommended that you set the sensitivity according to vehicle type.
03 LCD Display 3-8.
3-9.
03 LCD Display 3-10.
4. PC Application 4-1. Thinkware Dash Cam PC Viewer Thinkware Dash Cam Viewer for both Windows/MacOSis provided which can be used to watch videos recorded with the dash cam. The video files recorded by the dash cam are in one minute segments and the PC viewer allows user to watch the segments as a single continuous video. The setup file for the Thinkware Dash Cam PC Viewer is included in the MicroSD card in the package. Please check THINKWARE homepage(www.thinkware.
04 PC Application 4-1-2. Installing Thinkware Dash Cam Viewer Windows ① Double-click the Thinkware Dash Cam Viewer setup file saved in the MicroSD card to initiate program installation. ② Double-click the application icon once PC Viewer installation completes and the application main screen will then appear. Cautions S ystem requirements : Windows XP (32bit), Windows 7 (32bit/64bit), Windows 8.x (32bit/64bit) MAC ①M ove the file named “Dashcam Viewer.zip” stored in the MicroSD card to the desktop.
4-1-3. Select the Device Drive for X500 ① Click File from menu and select the drive for the portable storage drive for the connected MicroSD card. ② Select any file from the list to load entire video playlist in the memory card. Cautions T he MicroSD card will not be recognized by the software until it has been initialized in the dash cam. It is recommended that the user record at least one video clip on the MicroSD card with the dash cam unit before accessing the Thinkware Dash Cam PC Viewer.
04 PC Application 4-1-4.
4-1-5. View Video Playlist Select appropriate folder (Continuous Recording, Incident Recording, Manual Recording, Parking Motion, Parking Incident) to see the playlist for each recording mode.
05 Product Specifications 5. Specifications 5-1. Specifications The specifications of this product may change without prior notice for product improvements. Item Standard Note Model X500 Size/weight 104.3 x51.4 x 29.3mm / 109g Display Panel 2.
